Give Your Anime Figures That New Look – Repair, Repaint & Restore!

Table of Contents


When it comes to anime figures, they are quite expensive, and what’s worse? It’s the sight of your beloved anime characters being wrecked.

Isn’t it true that no one is perfect? This is also true in figures. There were a few complications that a collector can run into with their figures from time to time. What exactly are they? Paint chips, scratches, flaws, damaged pieces, and even stickiness were among the most common issues with figurines. 


If you’ve been collecting figures for a long time, you’ve probably come across figures that stick together. It’s easy to assume that it’s not a huge deal. I mean, it’s just a matter of washing it away. The issue with stickiness in anime figures is that it’s difficult to get rid of.

As a result of falling off shelves and being knocked over, a growing number of our anime figures needed intensive care. I wanted to share how to restore your anime figurines with you because I know a lot of you are anime and manga enthusiasts. I hope it is of use to you!

How to Repair Your Anime Figure

Figure Repair

Have you ever had an anime figurine break a limb after one too many swan dives from a shelf? Have you ever attempted to release a jammed joint only to have the internal peg shear in half? 

Whatever the reason, having a peg on an action figure break is a disappointment, especially if it’s a figure that’s too expensive to repair. But don’t worry; there is a technique to repair these broken pegs, and we’ll show you how.

Screws, it turns out, are similar in shape to the pegs used in action figure joints. Small screws can be found at Walmart or Home Depot, but you’ll need to harvest them from a Transformers figure or something similar that has a lot of tiny screws keeping it together for the truly small screws that need to be used on the thinner or smaller action figures. 

A small screwdriver (I suggest a set of Stanley precision screwdrivers), a Dremel with a drill bit, and some Krazy Glue are also required. Okay, so you’ve got your broken figure, your screws, and the rest of your tools ready to go.

It’s a simple way to fix any type of figure. You can use glue to repair porcelain, stone, and glass figurines as well. To properly fix it, use professional glue or epoxy. Professional gorilla glue, super glue, super glue gel, epoxy, putty, and Loctite glue are all included here.


  1. Make sure the broken figurine’s two surfaces are clean and debris-free.
  2. To one of the fractured parts, apply a drop of Loctite Ultra Gel Super Glue. The innovative dispenser enables precise control and application with no mess.
  3. Hold the pieces together firmly after pressing them together to ensure a snug fit. Allow 2 hours to pass without being interrupted. It takes 24 hours to reach full strength.
  4. Once dry, gently scrape away any remaining adhesive with a cotton swab dampened with nail polish remover or wipe away with a cotton swab saturated with nail polish remover.

Pro Tip: Begin With Small Chunks

Begin with Small Chunks

So, we’ll start with small pieces, and you’ll need equal quantities of both bottles to make your epoxy, which is normally wood epoxies. Take a little stake, using a little method, a popsicle stick, which is part of alcohol, and we won’t use small stakes here. 

And you do so in a really thorough manner. I’d advise you to go a bit crazy with the mixing while making your epoxy; you don’t want any areas of it that aren’t well mixed because they will become blue. 

Go above and beyond when it comes to mixing your epoxy. And we say, “Thank you for getting it.” Just start a little bit more to be sure because you don’t want totally blended portions.

Best Glue for Figurines

Is your toy broken? There’s no need to toss it yet; the finest glues for plastic toys are strong adhesives made expressly for use on plastic. 

However, not all types of plastic glue are compatible with all types of plastic toys; when you buy glue, read the label to be sure it’s suitable for the type of plastic you’re trying to repair. If the broken toy in issue is frequently exposed to water, make sure you use a waterproof or water-resistant compound.

Glue for Figurines


Super glue or epoxy is the most common plastic glue. Super glue is ready to use right out of the tube and dries quickly. Epoxy takes longer to dry since it is made up of a resin and a hardener that must be mixed together before use. 

Epoxy, on the other hand, is usually the strongest option (its tensile strength, or how much force it takes to stretch or strain material to a breaking point, is measured in pounds per square inch, or PSI), and it’s ideal for attaching pieces that don’t fit together tightly. 

When deciding between glue kinds, keep in mind that many types of glue are incompatible with polyethylene or polypropylene plastics, which your child’s toys are constructed of.

Although adhesives frequently set (or harden) rapidly, you’ll want to check the glue’s cure time to see how long it will take to hold damaged components together reliably. 

Cure times for several types of glue range from 12 to 24 hours. If your child is impatient, you may be able to discover glues with a faster cure time. These glues are not meant to be used by youngsters for safety reasons. 

When not in use, make sure they’re out of their reach. However, as long as the mending is done by an adult, these glues are great for mending broken plastic toys.

Gorilla Super Glue

Figure Kits

This Gorilla super glue gel is definitely liked on Amazon, with over 7,000 reviews and an amazing 4.6-star rating overall. And what about the good news? It works incredibly well on plastic, as long as the material isn’t polyethylene or polypropylene. 

The super glue is simple to use — just squeeze it directly onto the toy from the tube — and it won’t run or drip because it’s a gel mixture. The clear glue dries rapidly (in 10 to 45 seconds on average), but the manufacturer advises a 24-hour cure time.

J-B Weld

Anime Figures

If you don’t have the time or patience to wait for the glue to dry for 12 hours or more, this J-B Weld epoxy is for you. When it comes to glues for plastic toys, the epoxy dries in five minutes and cures to maximum strength in just one hour, which is virtually unheard of. 

The epoxy cures to a translucent yellow hue and has a tensile strength of 3,900 PSI, making it an exceptionally strong bond. The only drawback to this option is that it can be a little messy to use because you’ll need to mix the resin and hardener together. 

However, the work is made a little easier by the inclusion of a mixing tray and a stir stick. In addition to plastic, this glue adheres effectively to glass, fiberglass, and PVC.

Loctite Epoxy

Loctite Glue for Figures

This Loctite epoxy comes with a self-mixing dispenser, so you won’t have to waste time mixing it by hand every time you need it. The dispenser also distributes a consistent mixture of resin and hardener, so you won’t have to worry about getting the ratio perfect. 

The epoxy is extremely durable, weather-resistant, and can even attach to uneven surfaces. It takes 5 to 7 minutes to set and 24 hours to fully cure. 

The maker claims that you may color this epoxy with earth pigments to match the surface you’re attaching, even though it dries a translucent yellow. You can also sand it down, which means any sloppy applications may be sanded down.

How to Repaint Your Anime Figure

Repaint Anime Figure

Characters from anime, manga and bish*Jo games are frequently depicted in Japanese dolls. Collecting them is a hobby for otakus. Moe is an otaku slang term for the love of characters in video games, anime, or manga. Zoku is a post-World War II term for tribe, clan, or family, whereas moe is an otaku slang term for the love of characters in video games, anime, or manga.

It is not necessary to use oil paint. Most figure painters utilize acrylic paints, and many, like GW and Reaper, use the same paints as mini painters. Both of these paints can be applied with an airbrush, but only after they have been thinned. 

Painting the larger figures does not necessitate the use of an airbrush. Water-based cleansers are simple to use and remove (compared to caustic cleaners). Acrylic paints (Reaper, Vallejo, P3, Citadel, etc.) can be used for miniature painting as well as hobby acrylics (Apple barrel, Dreamcoat, etc.).

Make sure to start with ordinary acrylic paints and finish with matte paints. Always utilize thin, diluted layers instead of thin, diluted layers when using an airbrush. Also, check sure the sealer is okay for soft plastics/PVC, as some users have reported that the coating becomes sticky after a while. 

Acrylic paint comes in a range of colors and can be purchased from a hobby store. Find the colors you need to make sure they look good together at first glance.

How to Restore Your Anime Figure

Figure Restoration

When it comes to caring for the things we value, we all have the best of intentions. However, there are instances when we need to pay additional attention to our collections. 

We’ll show you how to clean and maintain your prized figurines and toys, whether they’re your beloved childhood action figure or that dainty porcelain figurine from the thrift store. 

When it comes to our health, we’ve all heard “prevention is the best medicine” at some point. Did you know, though, that the same adage applies to the health of our collectibles?

Here are some general guidelines for keeping your miniatures and toys looking new:

Excessive Handling Should Be Avoided

Stains and smudges can be caused by natural oils and pollutants on our hands. Keeping contact to a bare minimum will also lessen the likelihood of mishaps.

Dusting is Required on a Regular Basis

When it comes to keeping your treasures clean, dust is the most prevalent and easiest problem to solve. It’s best to use a soft paintbrush or duster to gently brush away any dusty build-up.

Storage and Display Should Be Done Correctly

It’s important to keep your figurines out of direct sunlight when exhibiting or storing them to avoid color fading. It’s also a good idea to pack your collectibles with a few silica packets to keep moisture at bay. If you reside in a humid environment, investing in a dehumidifier is also a good option.

Allow Them to Take a Breath

Even if your Batman action figure isn’t alive, the PVC plastic from which he’s manufactured needs to breathe. When the plasticizer that softens the PVC begins to evaporate and cannot escape, action figurines might become sticky to the touch. Proper circulation will also help to keep moisture out of the way, which can lead to mold growth.

Maintain a Constant Temperature in The Storage Area

Preventing your storage room from being excessively hot or cold will help your belongings last longer. Plastics can melt and deform in extreme heat, and freezing temperatures can break them.


Accidents do happen, no matter how careful we are with our valuable numbers. A small, fragile portion gets broken due to a slip, a little too much pressure, or simply a change of wind. It can be terrible if this happens. Taking care of your anime PVC figure collection isn’t difficult. It’s easy to do and takes very little time. Paying attention to your figures on a daily basis, just like your other variables, will help your collection survive much longer.

Shonen brings you the latest info from your favorite anime. Visit our news page for more updates.